Why Most Industries Still Use Rivet Fasteners?

Rivet is an old form of fastener which is still used today. In the world wars, airplanes and boats make use of rivet in the construction. Yet, you can still find rivet in the market today.

In the past, building ship and other iron structures like bridges require the use of hot rivets. Joining two pieces of either iron or steel using rivet is done once the rivet is heated that it turns into red hot. To blind the rivet over the hole, one person hits the other end while the other holds it using metal tongues. The rivet will contract when it cools down which joins the two pieces of steel or metal tighter together.

However, this process is dangerous because it requires heat and hammering. To get the hot rivets come with complications. One of the best example for this is way back 1920’s when skyscrapers were built in New York. Getting the hot rivets on a high level in never that easy.

However, things have changed today since rivets used are already cold rivets which size is relatively small than the old rivets. Ships ensure that the steel hulls are strongly welded together for quicker construction. Instead of using rivets, fasteners are now being used to bolt bridges together.

For those doing a DIY project at home, cold rivets can be used. Visit your nearest DIY store and you will sure find a pop riveting kit. The rivet will simply tighten itself using a moderate pressure and after placing the pop rivets through the hole. Since there are usually excess parts of the rivet, it can be crop off with the help of the riveting gun.

Today, these rivets are still in use in the aircraft industries. Rivets serve as a fastener to better hold two or more pieces together.

These clearly shows that rivets are truly a timeless fastener.

Rivet tools are mainly used to fix and hold things together. This made fastening things possible even where welding is not applicable. You can use rivets when joining a plywood with metal sheets. These fasteners are a good choice especially with the materials that are susceptible to deformation. Depending on where to use it, there are several sizes to choose from.

The fact that rivets are specially designed to be strong, there is no wonder why they are used in several industries and for different applications. There are several rivet manufacturer that you can find around the world. This fastener is not only known for its strength, but also for its accessibility and cost.